FINAL DRAFT - CISCO CONFIDENTIAL
9-22
Cisco ONS 15216 EDFA2 Operations Guide
78-16033-01
Chapter 9 TL1 Commands
TL1 Commands and Autonomous Messages
9.7.16 INH-MSG-ALL
Command INH-MSG-ALL
Prohibits the dispatch of some automatic messages from the ONS 15216 EDFA2 as specified in the
parameters. Does not affect response from RTRV commands.
Syntax
INH-MSG-ALL:[<tid>]::<ctag>::[<ntfcncde>],[<condtype>][,];
Example 9-18 INH-MSG-ALL Command
Amp01:ONS15216 EDFA2> INH-MSG-ALL:Amp01::123::MJ,LOS;
Table 9-22 ENT-USER-SECU Syntax Description
Parameter Syntax Description
uid string The user identifier (user name) of the new user being created.
Can be any combination of up to 10 alphanumeric characters.
pid string The user’s private identifier (password). Must be a string of up
to 10 characters, where at least 2 are non-alphabetic characters
and at least 1 is a special character. Special characters are +, #,
and %. (defined in Telcordia GR-831-CORE).
al Access level of the user. See “Summary of Security Permissions
for TL1 Commands” section on page 9-6 for access level
permissions.
R Read only privileges.
RW Read and write privileges.
RWA Read, write, and administrative privileges.
Table 9-23 INH-MSG-ALL Syntax Description
Parameter Syntax Description
ntfncde Notification code of the alarm or event that is to be
allowed (maps to cerent15216EdfaAlarmPriority for
active alarms). A null maps to none of the codes, i.e.,
with a null, all existing ntfncde inhibitions are kept
unchanged. Possible values are:
CR Critical alarm.
MJ Major alarm.
MN Minor alarm.
NA No alarm.
CL Cleared alarm.
To Next Page
Loading...
Need help?
General
