Cisco Catalyst 3650 User Manual

PurposeCommand or Action
Verifies your entries.
show ip igmp interface [interface-id]
Example:
Device# show ip igmp interface
Step 6
(Optional) Saves your entries in the configuration file.copy running-config startup-config
Example:
Device# copy running-config
Step 7
startup-config
Monitoring PIM
Use the privileged EXEC commands in the following table to monitor your PIM configurations.
Table 15: PIM Monitoring Commands
PurposeCommand
Displays all VRFs.
show ip pim all-vrfs tunnel [tunnel tunnel_number
| verbose]
Displays global auto-RP information.show ip pim autorp
Displays information about mroutes filtered by
administratively scoped IPv4 multicast boundaries
configured on an interface.
show ip pim boundary
Displays information about interfaces configured for
Protocol Independent Multicast (PIM).
show ip pim interface
Displays the PIM neighbor information.show ip pim neighbor
Displays information about Protocol Independent
Multicast (PIM) tunnel interfaces
show ip pim tunnel [tunnel | verbose]
Displays the VPN routing/forwarding instance.show ip pim vrf { word { all-vrfs | autorp |
boundary | bsr-router | interface | mdt | neighbor
| rp | rp-hash | tunnel } }
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3650 Switches)
OL-29890-01 155
Configuring PIM
Monitoring PIM

Cisco Catalyst 3650 Specifications

General

Brand	Cisco
Model	Catalyst 3650
Category	Switch
Language	English