Cisco Catalyst 3650 User Manual

Adjusting the MSDP Connection-Retry Interval
Perform this optional task to adjust the interval at which MSDP peers will wait after peering sessions are reset
before attempting to reestablish the peering sessions. In network environments where fast recovery of SA
messages is required, such as in trading floor network environments, you may want to decrease the
connection-retry interval to a time value less than the default value of 30 seconds.
SUMMARY STEPS
1.
enable
2.
configure terminal
3.
ip msdp timer connection-retry-interval
4.
exit
DETAILED STEPS
PurposeCommand or Action
Enables privileged EXEC mode.enable
Step 1
Example:
Device> enable
•
Enter your password if prompted.
Enters global configuration mode.configure terminal
Example:
Device# configure terminal
Step 2
Configures the interval at which MSDP peers will wait after
peering sessions are reset before attempting to reestablish the
peering sessions.
ip msdp timer connection-retry-interval
Example:
Device# ip msdp timer 45
Step 3
Exits global configuration mode and returns to privileged EXEC
mode.
exit
Example:
Device(config)# exit
Step 4
Configuring a Default MSDP Peer
Perform this optional task to configure a default MSDP peer.
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3650 Switches)
192 OL-29890-01
Configuring MSDP
Adjusting the MSDP Connection-Retry Interval

Cisco Catalyst 3650 Specifications

General

Brand	Cisco
Model	Catalyst 3650
Category	Switch
Language	English