PurposeCommand
Displays IGMP SSM mapping information.
show ip igmp ssm-mapping [ hostname/IP address
]
Displays static group information.show ip igmp static-group {class-map [ interface
[ type ] ]
Displays the selected VPN Routing/Forwarding
instance by name.
show ip igmp vrf
Displays the IP multicast forwarding information
base.
show ip mfib [ type number ]
Displays the multicast routing information base.show ip mrib { client | route | vrf }
Displays the IP multicast routing monitor information.show ip mrm { interface | manager | status-report
}
Displays the contents of the IP multicast routing table.
show ip mroute [group-name | group-address]
[source] [ count | interface | proxy | pruned |
summary | verbose]
Displays the Multicast Source Discovery Protocol
(MSDP) information.
show ip msdp { count | peer | rpf-peer | sa-cache |
summary | vrf }
Displays global multicast information.show ip multicast [ interface | limit | mpls |
redundancy | vrf ]
Displays information about interfaces configured for
PIM. This command is available in all software
images.
show ip pim interface [type number] [count | detail
| df | stats ]
Display all VRFs.show ip pim all-vrfs { tunnel }
Display global auto-RP information.show ip pim autorp
Displays boundary information.
show ip pim boundary [ type number ]
Display bootstrap router information (version 2).show ip pim bsr-router
Displays PIM interface information.
show ip pim interface [ type number ]
Displays multicast tunnel information.show ip pim mdt [ bgp ]
Lists the PIM neighbors discovered by the device.
This command is available in all software images.
show ip pim neighbor [type number]
Displays the RP routers associated with a
sparse-mode multicast group. This command is
available in all software images.
show ip pim rp [group-name | group-address]
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3650 Switches)
270 OL-29890-01
Configuring IP Multicast Routing
Displaying System and Network Statistics
To Next Page
Loading...
Need help?
General