Service Discovery Gateway , on page 277
Filtering, on page 278
Example: Global mDNS Configuration
The following example displays how to globally configure mDNS.
Device# configure terminal
Device(config)# service-list mdns-sd mypermit-all permit 10
Device(config-mdns-sd-s1)# exit
Device(config)# service-list mdns-sd querier query
Device(config-mdns-sd-s1)# service-type _dns._udp
Device(config-mdns-sd-s1)# end
Device# configure terminal
Device(config)# service-routing mdns-sd
Device(config-mdns)# service-policy mypermit-all IN
Device(config-mdns)# service-policy mypermit-all OUT
Related Topics
Enabling mDNS Gateway and Redistributing Services (CLI), on page 283
Service Discovery Gateway , on page 277
Filtering, on page 278
Example: Interface mDNS Configuration
The following example displays how to configure mDNS for an interface.
Device(config)#interface Vlan136
Device(config-if)# description *** Mgmt VLAN ***
Device(config-if)# ip address 9.7.136.10 255.255.255.0
Device(config-if)# ip helper-address 9.1.0.100
Device(config-if)# service-routing mdns-sd
Device(config-if-mdns-sd)# service-policy mypermit-all IN
Device(config-if-mdns-sd)# service-policy mypermit-all OUT
Device(config-if-mdns-sd)# service-policy-query querier 60
Related Topics
Enabling mDNS Gateway and Redistributing Services (CLI), on page 283
Service Discovery Gateway , on page 277
Filtering, on page 278
Where to Go Next for Configuring Services Discovery Gateway
You can configure the following:
•
IGMP
•
Wireless Multicast
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3650 Switches)
OL-29890-01 289
Configuring the Service Discovery Gateway
Example: Global mDNS Configuration
To Next Page
Loading...
Need help?
General