Cisco Catalyst 3650 User Manual

PurposeCommand or Action
Returns to privileged EXEC mode.end
Example:
Device(config)# end
Step 4
Verifies the configuration.show ip igmp snooping
Example:
Device# show ip igmp snooping
Step 5
(Optional) Saves your entries in the configuration
file.
copy running-config startup-config
Example:
Device# copy running-config startup-config
Step 6
Configuring a Multicast Router Port (CLI)
To add a multicast router port (add a static connection to a multicast router), use the ip igmp snooping vlan
mrouter global configuration command on the device.
Static connections to multicast routers are supported only on device ports.Note
SUMMARY STEPS
1.
enable
2.
configure terminal
3.
ip igmp snooping vlan vlan-id mrouter interface interface-id
4.
end
5.
show ip igmp snooping mrouter [vlan vlan-id]
6.
copy running-config startup-config
DETAILED STEPS
PurposeCommand or Action
Enables privileged EXEC mode.enable
Step 1
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3650 Switches)
OL-29890-01 61
Configuring IGMP
How to Configure IGMP Snooping

Cisco Catalyst 3650 Specifications

General

Brand	Cisco
Model	Catalyst 3650
Category	Switch
Language	English