PurposeCommand or Action
Enters the global configuration mode.configure terminal
Example:
Device# configure terminal
Step 2
Limits how long a Session Announcement Protocol (SAP)
cache entry stays active in the cache.
ip sap cache-timeout minutes
Example:
Device(config)# ip sap cache-timeout 30
Step 3
By default, entries are never deleted from the cache.
For minutes, the range is 1 to 1440 minutes (24 hours).
Returns to privileged EXEC mode.end
Example:
Device(config)# end
Step 4
Verifies your entries.show running-config
Example:
Device# show running-config
Step 5
Displays the SAP cache.show ip sap
Example:
Device# show ip sap
Step 6
(Optional) Saves your entries in the configuration file.copy running-config startup-config
Example:
Device# copy running-config
Step 7
startup-config
Configuring an IP Multicast Boundary (CLI)
This procedure is optional.
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3650 Switches)
OL-29890-01 265
Configuring IP Multicast Routing
Configuring an IP Multicast Boundary (CLI)
To Next Page
Loading...
Need help?
General