Cisco Catalyst 3650 User Manual

CHAPTER 13
IP Multicast Optimization: Optimizing PIM Sparse
Mode in a Large IP Multicast Deployment
•
Finding Feature Information, page 293
•
Prerequisites for Optimizing PIM Sparse Mode in a Large IP Multicast Deployment, page 293
•
Information About Optimizing PIM Sparse Mode in a Large IP Multicast Deployment, page 294
•
How to Optimize PIM Sparse Mode in a Large IP Multicast Deployment, page 297
•
Configuration Examples for Optimizing PIM Sparse Mode in a Large Multicast Deployment, page 299
•
Additional References, page 300
•
Feature History and Information for Optimizing PIM Sparse Mode in a Large IP Multicast Deployment,
page 300
Finding Feature Information
Your software release may not support all the features documented in this module. For the latest feature
information and caveats, see the release notes for your platform and software release.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support.
To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not
required.
Prerequisites for Optimizing PIM Sparse Mode in a Large IP
Multicast Deployment
•
You must have PIM sparse mode running in your network.
•
If you plan to use a group list to control to which groups the shortest-path tree (SPT) threshold applies,
you must have configured your access list before performing the task.
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3650 Switches)
OL-29890-01 293

Cisco Catalyst 3650 Specifications

General

Brand	Cisco
Model	Catalyst 3650
Category	Switch
Language	English