Cisco Catalyst 3650 User Manual

CHAPTER 8
Configuring MSDP
•
Finding Feature Information, page 169
•
Prerequisites for Using MSDP to Interconnect Multiple PIM-SM Domains, page 169
•
Information About Using MSDP to Interconnect Multiple PIM-SM Domains, page 170
•
How to Use MSDP to Interconnect Multiple PIM-SM Domains, page 184
•
Configuration Examples for Using MSDP to Interconnect Multiple PIM-SM Domains, page 209
•
Where to Go Next for MSDP, page 212
•
Additional References, page 213
•
Feature History and Information for Multicast Source Discovery Protocol, page 214
Finding Feature Information
Your software release may not support all the features documented in this module. For the latest feature
information and caveats, see the release notes for your platform and software release.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support.
To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not
required.
Prerequisites for Using MSDP to Interconnect Multiple PIM-SM
Domains
Before you configure MSDP, the addresses of all MSDP peers must be known in Border Gateway Protocol
(BGP).
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3650 Switches)
OL-29890-01 169

Cisco Catalyst 3650 Specifications

General

Brand	Cisco
Model	Catalyst 3650
Category	Switch
Language	English