Cisco Firepower 2100 User Manual

This direct connection is allowed because the Management interface has separate routing from the other
interfaces on the threat defense.
Figure 2: Edge Network Deployment
Cable the Device
To cable one of the above scenarios on the Firepower 2100, see the following steps.
Other topologies can be used, and your deployment will vary depending on your basic logical network
connectivity, ports, addressing, and configuration requirements.
Note
Procedure
Step 1 Install the chassis. See the hardware installation guide.
Step 2 Cable for a separate management network:
Cisco Firepower 2100 Getting Started Guide
9
Threat Defense Deployment with the Management Center
Cable the Device

Cisco Firepower 2100 Specifications

General

Brand	Cisco
Model	Firepower 2100
Category	Gateway
Language	English