xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
192
next hop is:0.0.0.0 ,from 0.0.0.0 (local router_id is:192.168.1.1)
origin IGP, metric 100, localpref 0, weight 32768, sourced, best
Community: no_advertise
DGS-3620-28SC:admin#
12-45 show bgp neighbors
Description
This command is used to display BGP and TCP connections with the BGP neighbor or routing
table entries containing a BGP neighbor. To display BGP and TCP connection information for
neighbor sessions, or routing table entries with BGP neighbor. For BGP, this includes detailed
neighbor attribute, capability, path, and prefix information. For TCP, this includes statistics related
to BGP neighbor session establishment and maintenance.
Format
show bgp neighbors {<ipaddr> {[advertised_routes | received_routes | routes |
received_prefix_filter | statistics]}}
Parameters
neighbors - Detailed information about TCP and BGP neighbor connections.
<ipaddr> - (Optional) Enter the IP address used for the configuration here.
advertised_routes - (Optional) Displays the routes advertised to a BGP neighbor.
received_routes - (Optional) Displays the routes received from this neighbor.
routes - (Optional) Displays routes in the routing table learned from the neighbor.
received_prefix_filter - (Optional) Displays the prefix filter information that is received from a
BGP neighbor.
statistics - (Optional) Displays the statistical information learned.
Restrictions
None. (EI Mode Only Command)
Example
To show the BGP neighbor or routes relative to one neighbor:
DGS-3620-28SC:admin# show bgp neighbor 10.10.10.2
Command: show bgp neighbor 10.10.10.2
BGP neighbor: 10.10.10.2 (Internal Peer)
-----------------------------------------------
Session State : Enabled
Session Activity : Enabled
Remote AS : 1
Remote Router ID : 192.168.252.252
BGP State : Established ( UP for 00:24:25)
Hold Time : 180 Seconds
Keepalive Interval : 60 Seconds
Advertisement Interval : 5 Seconds
To Next Page
Loading...
Need help?
General