xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
276
If no parameter is specified, all ports on the switch will be displayed.
Restrictions
Only Administrator level users can issue this command.
Example
To display the debug STP levels on all ports:
DGS-3620-28SC:admin# debug stp show flag
Command: debug stp show flag
Global State: Enabled
Port Index Event flag BPDU Flag State Machine Flag
---------- ---------- --------- ------------------
1 Detail Brief Disable
2 Detail Brief Disable
3 Detail Brief Disable
4 Detail Brief Disable
5 Detail Brief Disable
6 Detail Brief Disable
7 Detail Brief Disable
8 Detail Brief Disable
9 Detail Brief Disable
10 Detail Brief Disable
11 Detail Brief Disable
12 Detail Brief Disable
DGS-3620-28SC:admin#
20-13 debug stp show information
Description
This command used to display STP detailed information, such as the hardware tables, the STP
state machine, etc.
Format
debug stp show information
Parameters
None.
Restrictions
Only Administrator level users can issue this command.
To Next Page
Loading...
Need help?
General