xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
980
DSA : Enabled
DGS-3620-28SC:admin#
91-3 config ssh authmode
Description
This command is used to update the user authentication for SSH configuration.
Format
config ssh authmode [password | publickey | hostbased] [enable | disable]
Parameters
password - Specify the user authentication method.
publickey - Specify the user authentication method.
hostbased - Specify the user authentication method.
enable - Specify to enable the user authentication method.
disable - Specify to disable the user authentication method.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the SSH user authentication method:
DGS-3620-28SC:admin#config ssh authmode publickey enable
Command: config ssh authmode publickey enable
Success.
DGS-3620-28SC:admin#
91-4 show ssh authmode
Description
This command is used to display the user authentication methods.
Format
show ssh authmode
Parameters
None.
To Next Page
Loading...
Need help?
General