xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
403
Chapter 29
Domain Name
System (DNS) Resolver
Commands
config name_server add <ipaddr> {primary}
config name_server delete <ipaddr> {primary}
config name_server timeout <second 1-60>
create host_name <name 255> <ipaddr>
delete host_name [<name 255> | all]
show host_name {static | dynamic}
29-1 config name_server add
Description
This command is used to add a DNS resolver name server to the Switch.
Format
config name_server add <ipaddr> {primary}
Parameters
<ipaddr> - Enter the DNS Resolver name server IP address used here.
primary – (Optional) Specifies that the name server is a primary name server.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To add DNS Resolver primary name server 10.10.10.10:
DGS-3620-28SC:admin# config name_server add 10.10.10.10 primary
Command: config name_server add 10.10.10.10 primary
Success.
DGS-3620-28SC:admin#
To Next Page
Loading...
Need help?
General