xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
731
Example
To display DRAM utilization:
DGS-3620-28SC:admin# show utilization dram
Command: show utilization dram
DRAM utilization :
Total DRAM : 262144 KB
Used DRAM : 119586 KB
Utilization : 45%
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
67-5 show utilization flash
Description
This command is used to display real-time Flash utilization statistics.
Format
show utilization flash {unit <unit_id>}
Parameters
unit - Specifies which unit on the stacking system. If it is not specified, it refers to the master unit.
<unit_id> - Enter the unit ID used here.
Restrictions
None.
Example
To display Flash utilization:
DGS-3620-28SC:admin# show utilization flash
Command: show utilization flash
FLASH Memory Utilization :
Total FLASH : 30608 KB
Used FLASH : 4786 KB
Utilization : 15%
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
67-6 clear counters
Description
This command is used to clear the switch’s statistics counters.
To Next Page
Loading...
Need help?
General