xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
990
Format
show ssl cachetimeout
Parameters
None.
Restrictions
None.
Example
To show the SSL cache timeout:
DGS-3620-28SC:admin# show ssl cachetimeout
Commands: show ssl cachetimeout
Cache timeout is 600 second(s)
DGS-3620-28SC:admin#
92-6 config ssl cachetimeout
Description
This command is used to configure the cache timeout value which is designed for the dlktimer
library to remove the session ID after expiration. In order to support the resume session feature,
the SSL library keeps the session ID on the web server, and invokes the dlktimer library to
remove this session ID by the cache timeout value. The unit of argument’s value is second and its
boundary is between 60 (1 minute) and 86400 (24 hours). The default value is 600 seconds.
Format
config ssl cachetimeout <value 60-86400>
Parameters
cachetimeout - Specify the SSL cache timeout value attributes. The SSL cache timeout value
must be between 60 and 86400 seconds. The default value is 600 seconds
<value 60-86400> - Specify the SSL cache timeout value attributes. The SSL cache timeout
value must be between 60 and 86400 seconds. The default value is 600 seconds.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure an SSL cache timeout value of 60:
DGS-3620-28SC:admin# config ssl cachetimeout 60
To Next Page
Loading...
Need help?
General