xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
87
5-4 show access_profile
Description
This command is used to display the current access list table.
Format
show access_profile {[profile_id <value 1-6> | profile_name <name 1-32>]}
Parameters
profile_id - (Optional) Specify the index of the access list profile.
<value 1-6> - Specify the profile ID between 1 and 6.
profile_name - (Optional) Specify the name of the access list profile.
<name 1-32> - Specify the profile name between 1 and 32.
DGS-3620-28SC:admin#show access_profile
Command: show access_profile
Access Profile Table
Total User Set Rule Entries : 3
Total Used HW Entries : 19
Total Available HW Entries : 1005
===============================================================================
=
Profile ID: 1 Profile Name: 1 Type: Ethernet
Mask on
VLAN ID : 0xFF
Source MAC: FF-FF-FF-FF-FF-00
802.1p
Available HW Entries: 254
-------------------------------------------------------------------------------
--
Rule ID : 1 Ports: 1-10
Match on:
VLAN ID : 2 Mask : 0xFFF
Source MAC : 00-01-02-03-04-00
Action:
Permit
Replaced Priority to 2
Replace DSCP to 33
Matched Count: 0 packets
-------------------------------------------------------------------------------
To Next Page
Loading...
Need help?
General