xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
957
89-12 config snmp engineID
Description
This command is used to configure an identifier for the SNMP engine on the switch. Associated
with each SNMP entity is a unique engine ID.
Format
config snmp engineID <snmp_engineID 10-64>
Parameters
<snmp_engineID 10-64> - Specify the identify for the SNMP engine on the switch.
Restrictions
Only Administrator-level users can issue this command.
Example
To configure an identifier for the SNMP engine on the switch:
DGS-3620-28SC:admin#config snmp engineID 1023457890
Command: config snmp engineID 1023457890
Success.
DGS-3620-28SC:admin#
89-13 show snmp engineID
Description
This command is used to display the identification of the SNMP engine on the switch.
Format
show snmp engineID
Parameters
None.
Restrictions
None.
Example
To display the identification of an SNMP engine:
To Next Page
Loading...
Need help?
General