xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
732
Format
clear counters {po
rts <portlist>
}
Parameters
ports - Specify a range of ports to be configured. The beginning and end of the port list range are
separated by a dash.
<portlist> - Specify a range of ports to be configured.
Note: If no parameter is specified, the system will count all of the ports.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To clear the switch’s statistics counters for ports 7 to 9:
DGS-3620-28SC:admin#clear counters ports 7-9
Command: clear counters ports 7-9
Success.
DGS-3620-28SC:admin#
67-7 clear log
Description
This command is used to clear the switch’s history log.
Format
clear log
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To clear the switch’s history log:
DGS-3620-28SC:admin#clear log
To Next Page
Loading...
Need help?
General