D-Link DGS-3620-52P User Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
196
12-48 show bgp
Description
This command is used to display BGP configuration and summary of the BGP status.
Format
show bgp {summary}
Parameters
summary - (Optional) Specifies that the summary of the BGP status will be included in the
display.
Restrictions
None. (EI Mode Only Command)
Example
This example displays the BGP setting:
DGS-3620-28SC:admin# show bgp
Command: show bgp
BGP Global State : Disabled
Version : 4
BGP Router Identifier : 10.90.90.90
Synchronization : Enabled
Enforce First AS : Enabled
Local AS number : 100
Scan Time : 60
Hold Time : 300 Seconds
Keepalive Interval : 100 Seconds
Dampening : Enabled
Always Compare MED : Disabled
Deterministics MED : Disabled
Med Confed : Disabled
Default Local Preference : 200
AS Path Ignore : Disabled
Compare Router ID : Enabled
MED Missing as Worst : Disabled
Compare Confederation Path : Disabled
Fast External Fallover : Enabled
Aggregate Next Hop Check : Disabled
BGP Trap : None
DGS-3620-28SC:admin# show bgp summary
Command: show bgp summary
BGP Router Identifier : 172.16.1.1

D-Link DGS-3620-52P Specifications

General

Brand	D-Link
Model	DGS-3620-52P
Category	Switch
Language	English