xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
28
Restrictions
None.
Example
To clear the terminal screan:
DGS-3620-28SC:admin#clear
Command: clear
2-26 config terminal width
Description
This command is used to configure the terminal width.
Format
config terminal width [default | <value 80-200>]
Parameters
default - Specify the default terminal width value.
<value 80-200> - Specify a terminal width value between 80 and 200 characters. The default
value is 80.
Restrictions
None.
Example
To configure the terminal width:
DGS-3620-28SC:admin#config terminal width 90
Command: config terminal width 90
Success.
DGS-3620-28SC:admin#
2-27 show terminal width
Description
This command is used to display the configuration of the current terminal width.
To Next Page
Loading...
Need help?
General