xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
729
Restrictions
None.
Example
To display the errors of port 3:
DGS-3620-28SC:admin#show error ports 3
Command: show error ports 3
Port Number : 3
RX Frames TX Frames
--------- ---------
CRC Error 0 Excessive Deferral 0
Undersize 0 CRC Error 0
Oversize 0 Late Collision 0
Fragment 0 Excessive Collision 0
Jabber 0 Single Collision 0
Drop Pkts 0 Collision 0
Symbol Error 0
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
67-3 show utilization
Description
This command is used to display real-time port utilization or CPU statistics.
Format
show utilization [ports | cpu]
Parameters
ports - Specify to display real-time port statistics.
cpu - Specify to display real-time CPU statistics.
Restrictions
None.
Example
To display port utilization:
DGS-3620-28SC:admin#show utilization ports
Command: show utilization ports
Port TX/sec RX/sec Util Port TX/sec RX/sec Util
------ ---------- ---------- ---- ------ ---------- ---------- ----
1 0 0 0 21 0 0 0
To Next Page
Loading...
Need help?
General