xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
950
Parameters
<user_name 32> - Specify the name of the user on the host to be deleted. The range is 1 to 32
characters.
Restrictions
Only Administrator-level users can issue this command.
Example
To delete an SNMP user:
DGS-3620-28SC:admin#delete snmp user dlink
Command: delete snmp user dlink
Success.
DGS-3620-28SC:admin#
89-3 show snmp user
Description
This command is used to display information on each SNMP username in the group username
table.
Format
show snmp user
Parameters
None.
Restrictions
None.
Example
To display SNMP user information:
DGS-3620-28SC:admin#show snmp user
Command: show snmp user
Username Group Name VerAuthPriv
--------------------------- --------------------------- ------------
initial initial V3 NoneNone
To Next Page
Loading...
Need help?
General