xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
966
DGS-3620-28SC:admin#show stp
Command: show stp
STP Bridge Global Settings
-----------------------------
STP Status : Enabled
STP Version : MSTP
Max Age : 20
Forward Delay : 15
Max Hops : 20
TX Hold Count : 6
Forwarding BPDU : Enabled
NNI BPDU Address : dot1d
DGS-3620-28SC:admin#
90-2 show stp instance
Description
This command is used to display each instance parameters settings. Value means the instance ID,
if there is no input of this value, all instances will be shown.
Format
show stp instance {<value 0-64>}
Parameters
<value 0-64> - (Optional) Specify the MSTP instance ID. Instance 0 represents the default
instance: CIST. This value must be between 0 and 64.
Restrictions
None.
Example
To display STP instances:
To Next Page
Loading...
Need help?
General