Features ED34-862
244 FXMQ-P
1. Features
Ceiling Mounted Duct Type
Middle and high static pressure
allows for flexible duct design
FXMQ20P/FXMQ25P
FXMQ32P/FXMQ40P
FXMQ50P/FXMQ63P
FXMQ80P/FXMQ100P
FXMQ125P
New
All models are only 300 mm in height, an
improvement over the 390 mm height of
conventional models. The weight of the
FXMQ40P has been reduced from 44 kg to 28 kg.
A DC fan motor increases the external static
pressure capacity range to include middle to high
static pressures, increasing design flexibility.
Drain pump is equipped as
standard accessory with
700 mm lift.
Control of the airflow rate has been improved
from 2-step to 3-step control.
(dB(A))
44/42/40
125100
43/41/39
80
42/40/38
63
41/39/37
50
33/31/29
20
Sound
level
(HH/H/L)
FXMQ-P 30
34/32/30
32
39/37/35
40
700 mm
Ceiling
30 Pa–100 Pa for FXMQ20P-32P
30 Pa–160 Pa for FXMQ40P
50 Pa–200 Pa for FXMQ50P-125P
Low operation sound level
Improved ease of installation
Improved ease of maintenance
Airflow can be controlled using a remote controller. With
the conventional model, the airflow rate was controlled from
the PC board. It is automatically adjusted to the range
between approximately ±10% of the rated HH tap airflow.
Energy-efficient
The drain pan can be detached for easy cleaning. A new
antibacterial treatment that uses silver ions has been
applied to the drain pan, preventing the growth of slime,
mould and bacteria that cause blockages and odours.
The adopted DC fan motor is much more efficient than
the conventional AC motor, yielding an approximate
20% decrease in energy consumption. (FXMQ125P)
Все каталоги и инструкции здесь: http://splitoff.ru/tehn-doc.html
To Next Page
Loading...
Need help?
General
