Danfoss VLT AutomationDrive FC 301 Programming Guide

5.9.2 8-1* Ctrl. Word Settings
Parameter 8-10 Control Word Profile
Table 503: Parameter 8-10 Control Word Profile
8-10 Control Word Profile
Default value: Size related
Parameter type: Option
Setup: All setups
Conversion index: –
Data type: Uint8
Change during operation: True
Select the interpretation of the control and status words corresponding to the installed fieldbus. Only the selections valid for the
fieldbus installed in slot A are visible in the LCP display. For guidelines in selection of [0] FC profile and [1] PROFIdrive profile, refer to
the product-specific design guide. For more guidelines in the selection of [1] PROFIdrive profile, refer to the Installation Guide for the
installed fieldbus.
Option
Name
Description
[0]
FC profile
[1]
PROFIdrive profile
[3]
FC motion profile
N O T I C E
This option is only available with software version 48.XX.
Assigns motion-specific functions to various control and status word bits. This option is available
when [9] Positioning or [10] Synchronization is selected in parameter 1-00 Configuration Mode.
[5]
ODVA
[7]
CANopen DSP 402
[8]
MCO
Parameter 8-13 Configurable Status Word STW
Table 504: Parameter 8-13 Configurable Status Word STW
8-13 Configurable Status Word STW
Default value: Size related
Parameter type: Option, Array [16]
Setup: All setups
Conversion index: –
Data type: Uint8
Change during operation: True
Select the interpretation of the control and status words corresponding to the installed fieldbus. Only the selections valid for the
fieldbus installed in slot A are visible in the LCP display. For more guidelines in the selection of [1] PROFIdrive profile, refer to the
Installation Guide for the installed fieldbus.
Option
Name
Description
[0]
No function
The input is always low.
[1]
Profile default
Dependent on the profile set in parameter 8-10 Control Profile.
[2]
Alarm 68 Only
The input goes high whenever Alarm 68 Safe Stop Activated is active and goes low
whenever Alarm 68 Safe Stop Activated is not activated.
[3]
Trip excl Alarm 68
AU275636650261en-000101 / 130R0334 | 275Danfoss A/S © 2022.12
Parameter Descriptions
VLT AutomationDrive FC 301/302
Programming Guide

Danfoss VLT AutomationDrive FC 301 Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 301
Category	DC Drives
Language	English