•
•
•
•
Parameter 0-21 Display Line 1.2 Small
The options are the same as those listed for parameter 0-20 Display Line 1.1 Small.
Parameter 0-22 Display Line 1.3 Small
The options are the same as those listed for parameter 0-20 Display Line 1.1 Small.
Parameter 0-23 Display Line 2 Large
The options are the same as those listed for parameter 0-20 Display Line 1.1 Small.
Parameter 0-24 Display Line 3 Large
The options are the same as those listed for parameter 0-20 Display Line 1.1 Small.
Parameter 0-25 My Personal Menu
Table 19: Parameter 0-25 My Personal Menu
Default value: Size related
Parameter type: Range, 0 - 9999, Array [50]
Change during operation: True
Define up to 50 parameters to appear in the Q1 Personal Menu, accessible via the [Quick Menu] key on the LCP. The parameters are
shown in the Q1 Personal Menu in the order they are programmed into this array parameter. Delete parameters by setting the value
to 0000. For example, this can be used to provide quick, simple access to just 1 or up to 50 parameters, which require changing on a
regular basis (for example, for plant maintenance reasons) or by an OEM to enable simple commissioning of their equipment.
5.1.4 0-3* LCP Custom Readout
It is possible to customize the display elements for various purposes:
Custom readout. Value proportional to speed (linear, squared, or cubed depending on the unit selected in parameter 0-30 Cus-
tom Readout Unit).
Display text. Text string stored in a parameter.
Custom reaout
The calculated value to be shown is based on the settings in:
Parameter 0-30 Custom Readout Unit.
Parameter 0-31 Custom Readout Min Value (linear only).
AU275636650261en-000101 / 130R0334 | 49Danfoss A/S © 2022.12
Parameter Descriptions
VLT AutomationDrive FC 301/302
Programming Guide
To Next Page
Loading...
Need help?
General