Danfoss VLT AutomationDrive FC 301 Programming Guide

Option
Name
Description
[12]
Trip
[13]
Trip w manual reset
[14]
Trip lock
Parameter 13-92 Alert Text
Table 697: Parameter 13-92 Alert Text
13-92 Alert Text
Default value: Size related
Parameter type: Range, 0 - 20, Array [10]
Setup: 2 setups
Conversion index: 0
Data type: VisStr 20
Change during operation: True
Enter the text that the drive shows in the display when the event is defined in parameter 13-90 Alert Trigger occurs.
Parameter 13-97 Alert Alarm Word
Table 698: Parameter 13-97 Alert Alarm Word
13-97 Alert Alarm Word
Default value: 0
Parameter type: Range, 0 - 3FF hex
Setup: All setups
Conversion index: 0
Data type: Uint32
Change during operation: False
Shows the alarm word of a user-defined alarm in hex code.
Parameter 13-98 Alert Warning Word
Table 699: Parameter 13-98 Alert Warning Word
13-98 Alert Warning Word
Default value: 0
Parameter type: Range, 0 - 3FF hex
Setup: All setups
Conversion index: 0
Data type: Uint32
Change during operation: False
Shows the warning word of a user-defined alarm in hex code.
Parameter 13-99 Alert Status Word
Table 700: Parameter 13-99 Alert Status Word
13-99 Alert Status Word
Default value: 0
Parameter type: Range, 0 - 3FF hex
Setup: All setups
Conversion index: 0
Data type: Uint32
Change during operation: False
Shows the status word of a user-defined alarm in hex code.
5.14 Parameter Group 14-** Special Functions
5.14.1 14-0* Inverter Switching
Parameter 14-00 Switching Pattern
Table 701: Parameter 14-00 Switching Pattern
14-00 Switching Pattern
Default value: [1] SFAVM
Parameter type: Option
Setup: All setups
Conversion index: -
Data type: Uint8
Change during operation: True
AU275636650261en-000101 / 130R0334450 | Danfoss A/S © 2022.12
Parameter Descriptions
VLT AutomationDrive FC 301/302
Programming Guide

Danfoss VLT AutomationDrive FC 301 Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 301
Category	DC Drives
Language	English