Danfoss VLT AutomationDrive FC 301 Programming Guide

Parameter 43-23 FPC Fan D Speed
Table 1421: Parameter 43-23 FPC Fan D Speed
43-23 FPC Fan D Speed
Default value: 0 RPM
Parameter type: Range, 0 - 65535, Array [2]
Setup: All set-ups
Conversion index: 67
Data type: Uint16
Change during operation: True
Shows the speed of the power card fan D.
Parameter 43-24 FPC Fan E Speed
Table 1422: Parameter 43-24 FPC Fan E Speed
43-24 FPC Fan E Speed
Default value: 0 RPM
Parameter type: Range, 0 - 65535, Array [2]
Setup: All set-ups
Conversion index: 67
Data type: Uint16
Change during operation: True
Shows the speed of the power card fan E.
Parameter 43-25 FPC Fan F Speed
Table 1423: Parameter 43-25 FPC Fan F Speed
43-25 FPC Fan F Speed
Default value: 0 RPM
Parameter type: Range, 0 - 65535, Array [2]
Setup: All set-ups
Conversion index: 67
Data type: Uint16
Change during operation: True
Shows the speed of the power card fan F.
5.33 Parameter Group 50-** License
Parameter 50-00 License Installed
Table 1424: Parameter 50-00 License Installed
50-00 License Installed
Default value: 0
Parameter type: Range, 0 - 40, Array [3]
Setup: All setups
Conversion index: 0
Data type: VisibleString
Change during operation: False
Shows all licenses activated in the drive.
Parameter 50-01 License Code
Table 1425: Parameter 50-01 License Code
50-01 License Code
Default value: Size related
Parameter type: Range, 0 - 19
Setup: 1 setup
Conversion index: 0
Data type: VisibleString
Change during operation: True
Enter the license code provided by the Danfoss sales representative to activate licensed features in the drive. The license code com-
prises 16 alphanumeric characters in the format (XXXX-XXXX-XXXX-XXXX). When the license is accepted by the drive, the parameter
is shown as 0000-0000-0000-0000.
N O T I C E
Restart the drive after entering the new license code. Parameters relevant for configuring the new feature(s) are now shown in
the drive. The new type code is reflected in parameter 15-45 Actual Typecode String. The original type code of the drive can be
viewed in parameter 15-44 Ordered Typecode String. The activated license is shown in parameter 50-00 License Installed.
AU275636650261en-000101 / 130R0334 | 681Danfoss A/S © 2022.12
Parameter Descriptions
VLT AutomationDrive FC 301/302
Programming Guide

Danfoss VLT AutomationDrive FC 301 Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 301
Category	DC Drives
Language	English