Danfoss VLT AutomationDrive FC 301 Programming Guide

4.2.1
4.3
4.4
5
5.1
5.1.1
5.1.2
5.1.3
5.1.4
5.1.5
5.1.6
5.1.7
5.1.8
5.2
5.2.1
5.2.2
5.2.2.1
5.2.2.2
5.2.2.2.1
5.2.2.2.2
5.2.2.2.3
5.2.2.3
5.2.2.3.1
5.2.2.3.2
5.2.2.3.3
5.2.3
5.2.4
5.2.5
5.2.6
5.2.7
5.2.8
5.2.9
5.2.10
5.2.10.1
5.2.10.2
5.2.10.3
5.2.10.4
LCP Keys 31
Restoring Factory Default Settings Using the Recommended Initialization 33
Restoring Factory Default Settings Using Manual Initialization 33
Parameter Descriptions 35
Parameter Group 0-** Operation and Display 35
0-0* Basic Settings 35
0-1* Set-up Operations 37
0-2* LCP Display 41
0-3* LCP Custom Readout 49
0-4* LCP Keypad 54
0-5* Copy/Save 56
0-6* Password 57
0-7* Clock Settings 59
Parameter Group 1-** Load and Motor 62
1-0* General Settings 62
Motor Setups 69
Asynchronous Motor Setup 69
PM Motor Setup 70
PM Rotor Detection 70
PM Parking 71
Application-specific Adjustment when Running VVC+ with PM Motors 71
SynRM Motor Setup with VVC+ 71
SynRM Initial Programming 71
SynRM Programming Motor Data 71
Application-specific Adjustment when Running VVC+ with SynRM Motors 72
1-1* Special Settings 72
1-2* Motor Data 75
1-3* Adv. Motor Data 81
1-5* Load Indep. Setting 88
1-6* Load Depend. Setting 92
1-7* Start Adjustments 95
1-8* Stop Adjustments 98
1-9* Motor Temperature 102
PTC Thermistor Connection 107
KTY Sensor Connection 108
ETR 109
ATEX ETR 109
AU275636650261en-000101/130R03344 | Danfoss A/S © 2022.12
Contents
VLT AutomationDrive FC 301/302
Programming Guide

Danfoss VLT AutomationDrive FC 301 Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 301
Category	DC Drives
Language	English