Danfoss VLT AutomationDrive FC 301 Programming Guide

Parameter 33-81 Power-up State
Table 1227: Parameter 33-81 Power-up State
33-81 Power-up State
Default value: [1] Motor on
Parameter type: Option
Setup: 2 setups
Conversion index: -
Data type: Uint8
Change during operation: True
Option
Name
Description
[0]
Motor off
[1]*
Motor on
Parameter 33-82 Drive Status Monitoring
Table 1228: Parameter 33-82 Drive Status Monitoring
33-82 Drive Status Monitoring
Default value: [1] On
Parameter type: Option
Setup: 2 setups
Conversion index: -
Data type: Uint8
Change during operation: True
Option
Name
Description
[0]
Off
[1]*
On
Parameter 33-83 Behavior afterError
Table 1229: Parameter 33-83 Behavior afterError
33-83 Behavior afterError
Default value: [0] Coast
Parameter type: Option
Setup: 2 setups
Conversion index: -
Data type: Uint8
Change during operation: True
Option
Name
Description
[0]*
Coast
[1]
Coast and brake
[2]
Controlled stop
[3]
Contr.stop + brake
[5]
Only errorhandler
Parameter 33-84 Behavior afterEsc.
Table 1230: Parameter 33-84 Behavior afterEsc.
33-84 Behavior afterEsc.
Default value: [0] Controlled stop
Parameter type: Option
Setup: 2 setups
Conversion index: -
Data type: Uint8
Change during operation: True
AU275636650261en-000101 / 130R0334 | 621Danfoss A/S © 2022.12
Parameter Descriptions
VLT AutomationDrive FC 301/302
Programming Guide

Danfoss VLT AutomationDrive FC 301 Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 301
Category	DC Drives
Language	English