BASIC OPERATIONS
68 77144 Issue 8 August 2009
PRINTING A DEFAULT TEST MESSAGE
The printer can print a test message to check print quality, as follows:
(1) Turn off the printer.
(2) Hold down the letter ‘T’ button and switch on the printer.
(3) Keep the ‘T’ button depressed until the screen shows that initialising is
complete. During this time the test message will be loaded.
(4) Print the test message by passing a piece of card in front of the product
detector and printer. Check the test message is clear and complete. If any
nozzles appear blocked, refer to the section “Priming the print head”.
It is also possible to print the test message by selecting the message called “TEST”
from the print which message menu.
To Next Page
Loading...
Need help?
General
