PROGRAMMING THE PRINTER
76 77144 Issue 8 August 2009
ENTER NUMBER OF SHIFTS
Up to four production shifts can be programmed, and can be given code letters,
for example shifts A, B, C, D.
These shift codes are then split into the working hours of the production line. The
printer can be set to print out the shift automatically. See also formatting messages
on page 88. To enable the print out of different shifts, the times and shift codes
must be programmed. Enter the shift codes and times as follows:
(1) Scroll through the main menu bar on the LCD with the directional arrow
keys and select the shift code icon
(2) A prompt asking how many shifts are
required is displayed, in this case select 3,
press enter.
(3) A flashing cursor block will be seen at the
top left of the screen under the A character.
Decide which code letters are to be
designated to the shifts. For this example there
are 3 shifts
Press the corresponding key to select the function
PRINTING MESSAGE1
NORMAL PRINT
INK STATUS OK
ENTER NUMBER OF
SHIFTS 2, 3 OR 4
SHIFT CODES
A 00:00
A 00:00
A 00:00
Default shift code screen
To Next Page
Loading...
Need help?
General
