DV11
Operation and Maintenance
159
Engine Diagnostic
Printed in Mar. 2005 PS-MMA0608-E1A
3.8.4. Engine brake control
z Engine brake is worked by the operation of the engine brake switch in the
dashboard.
- Engine brake : There is section of one shift and two shift.
One step : the function of the braking is operated at the three cylinders
only.
Two step : the function of the braking is operated at the six cylinders all.
z Operating method
Engine brake switch : [first step] , [second step] , [OFF]
z Operating condition
- Engine brake switch : normal
- Vehicle speed : more than specified speed.
- Engine speed : more than specified speed.
- Oil temperature : more than specified temperature.
z Free condition
- Engine speed : less than specified speed.
- Vehicle speed : less than specified speed.
- Accelerator pedal : depressed or pedal trouble.
- Clutch pedal : depressed or pedal trouble.
- Oil temperature : less than specified value.
3.8.5. Cruise control
z Provide the driver with ability to control in order to travel and maintain a setting
speed.
z Operation switch : [SET/INC], [SET/DEC] , [RESUME] , [CRUISE OFF]
z Operating method
- Range of vehicle speed of possible cruise control : 40 - 100 km/h
- Cruise control is standard by when the vehicle speed is more than 40km/h,
cruise control is disabled when the vehicle speed is less than 40km/h.
- Setting of the cruise control by using the accelerator pedal.
After the vehicle speed is raised by pressing the accelerator pedal,
pressed switch [SET] at the time of desired vehicle speed.
Switch [SET/INC] or [SET/DEC] have the functions of [SET] all.
- Setting of raise / drop by using the switch during cruise running.
Adjusting for raising of cruise vehicle speed : switch [SET/INC] is pressed.
Adjusting for dropping of cruise vehicle speed : switch [SET/DEC] is
depressed.
Switch [SET/INC], [SET/DEC] is depressed once, is increased as one
step, and is increased continuously when is kept on depressing.
To Next Page
Loading...
Need help?
General
