Doosan PU158TI - Operation Tip; Periodic Inspection Cycle

Technical Information
- 51 -
2.4. Operation Tip
2.4.1. Periodic Inspection cycle
{ : Check & adjust z : Replace
Inspection Daily
Inspection time (hours)
Remark
50 200 600 800 1,200
Cooling
System
Check for leakage
(hoses, clamp)
{
Check the water level {
Change the coolant water z
Adjust the V-belt tension {
Every
2,000 hrs
Clean the radiator
{
Lubrication
System
Check for leakage
{
Check the oil level gauge {
Change the lubricating oil
z
1st
{
Replace the oil filter cartridge
z
1st
{
Intake &
Exhaust
System
Check the leakage for
intercooler (hoses, clamp)
{
Clean and change
the air cleaner element
{
clean
z
Clean the inter-cooler air fins {
Clean the turbo-charger
Every
2,000 hrs
Fuel
System
Check the leakage fuel line
{
Clean the fuel strainer
of fuel feed pump
{
Remove sediment from fuel tank {
Drain the water in separator {
Replace the fuel filter element z
Check fuel Injection timing {
When
necessary
Check the injection nozzles {
When
necessary
Engine
Adjust
Check the state of exhaust gas
{
Check the battery charging {
Check the compression
pressure
{
When
necessary
Adjust Intake / Exhaust
valve clearance
{
1st
When
necessary