Instructions for use | Atlan A100 (XL), A300 (XL), A350 (XL) SW 2.1n 299
Technical data
15.23 Declaration of hazardous substances in accordance
with Regulation CLP 1272/2008 Appendix VI Part 3
Certain materials of this product contain the following substances in a proportion
exceeding 0.1 % by mass:
– Lead (CAS No. 7439-92-1)
This product is safe to use for patients who are sensitive to the indicated
substances.
Dräger is aware of the following residual risks:
–None
15.24 EMC declaration
15.24.1 General information
This device was tested for electromagnetic compatibility using accessories from the
list of accessories. Other accessories may only be used if they do not compromise
the electromagnetic compatibility. The use of non-compliant accessories may result
in increased electromagnetic emissions or decreased electromagnetic immunity of
the device.
This device may be used in the direct vicinity of other devices only if Dräger has
approved this device arrangement. If no approval has been given by Dräger, it must
be ensured that this device functions correctly in the desired arrangement before
use. The instructions for use for the other devices must be followed.
15.24.2 Electromagnetic environment
This device may only be used in environments specified in section "Environments
of use" on page 10.
The emissions characteristics of this equipment make it suitable for use in
industrial areas and hospitals (CISPR 11 class A). If it is used in a residential
environment (for which CISPR 11 class B is normally required), this equipment
might not offer adequate protection to radio-frequency communication services.
The user might need to take mitigation measures, such as relocating or re-orienting
the equipment.
Emissions Compliance
Radiated emissions Class A, group 1 (30 MHz to1 GHz)
Conducted emissions Class A, group 1 (150 kHz to 30 MHz)
To Next Page
Loading...
Need help?
General
