Instructions for use | Atlan A100 (XL), A300 (XL), A350 (XL) SW 2.1n 7
Information about this document
1 Information about this document
1.1 Typographical conventions
1.2 Use of terms
Dräger uses the term "accessories" not only for accessories in the sense of
IEC 60601-1, but also for consumables, removable parts, and attached parts.
1.3 Illustrations
Illustrations of products and screen content in this document may differ from the
actual products depending on configuration and design.
1.4 Main devices and options
All available main devices and options are described in this document. Observe the
equipment that is applicable for the present device. For further information see:
"Main devices and options", page 37.
Text Bold, italicized text indicates labels on the device and screen text.
1. Numbers with a period indicate the individual steps within a process
sequence. The numbering for each new process sequence starts once
more at number 1.
a. Lower-case letters with a period indicate secondary steps. The lettering for
each new higher-level step starts once more with the letter a.
● This bullet point indicates individual steps without any specific order.
► This triangle in safety instructions and precautionary statements indicates
the options for avoiding danger.
(1) Numbers in parentheses refer to elements in illustrations.
1 Numbers in illustrations denote elements referred to in the text.
– Dashes indicate listings.
> The greater-than symbol indicates the navigation path in a dialog.
This symbol indicates information that will facilitate the use of the product.
To Next Page
Loading...
Need help?
General
