Ecolab EcoAdd User Manual

7.9.11.1 [Service interval]
- [variable]
Fig. 62: Service interval - variable
After selecting [service interval]
- [variable] the setting is saved by clicking the
button. The screen switches to the Configuration overview.
[Service interval] - select:
1.
[Main menu] :
Ä Chapter 7.6 ‘Main menu’ on page 66
2.
[Configuration menu] :
Ä Chapter 7.9 ‘Overview - Configuration’ on page 83
3. Scroll to the [service interval] setting using the scrollbar on the right-hand edge of the
screen and select.
4. ‘Select variable’.
ð
The ‘variable’ selection box is selected.
5.
[ Press the Next button] .
ð
Screen change for setting: ‘Service interval’ / ‘weeks’.
6. Enter the number of weeks with the scrollbar
.
7.
Press the button.
ð
All settings are saved, and the screen switches back to the Configuration
overview
.
8.
Pressing the button returns to the [Main menu].
9.
Pressing the button returns to the [Operating display].
Control / software
103 Rev. 2-05.2018

Ecolab EcoAdd Specifications

General

Brand	Ecolab
Model	EcoAdd
Category	Water Pump
Language	English