7.9.14.1 [Oval gear meter]
- setting
Fig. 68: ‘Configuration’ ‘Oval gear meter’
1.
[Main menu] :
Ä
Chapter 7.6 ‘Main menu’ on page 66
2.
[Configuration menu] :
Ä
Chapter 7.9 ‘Overview - Configuration’ on page 83
3. Use the scrollbar to scroll to the [Oval gear meter] menu option.
4. [Oval gear meter] - select.
ð
Screen change for setting: [Oval gear meter]
5. [Oval gear meter] - select.
The following can be selected:
Ä
Chapter 7.9.14.1.1 ‘Metering monitoring’ on page 111
Ä
Chapter 7.9.14.1.2 ‘Metering controller’ on page 112
Ä
Chapter 7.9.14.1.3 ‘Max. metering phase’ on page 113
ð
Screen change for setting: [Oval gear meter]
6.
Press the button.
ð
The setting is saved, and the screen switches back to the configuration overview
.
7.
Pressing the button returns to the [Main menu].
8.
Pressing the button returns to the [Operating display].
Control / software
110Rev. 2-05.2018
To Next Page
Loading...
Need help?
General
