6.4 Language selection
The pump is set to display a language selection screen the first time it is
switched on to ensure that the operating language is suitable for the on-site
operating personnel.
The language selection screen is displayed in English because this makes it
easiest to select from the languages available and English is widely
understood.
Fig. 18: Language selection after starting the ‘EcoAdd pump’
Language selection after switching on the pump for the first time:
1.
‘Press the ON/OFF button’ on the pump.
ð
The pump switches on.
The ‘Language’
screen for language selection is displayed.
2. Select the required system language.
The following languages can be selected:
n English
n Spanish
n German
n French
n Italian
3.
Press the Next button.
ð
The selected language is saved.
The pump switches of
f automatically.
After re-starting the pump, the start screen is displayed with all parameters
(pos. 4). The pump is ready for operation after approx. 5 seconds (pos.5).
Assembly, installation, modification and upgrades
53 Rev. 2-05.2018
To Next Page
Loading...
Need help?
General
