Ecolab EcoAdd User Manual

7.9.16 Import/export of the configuration
The configuration data can be updated via a USB stick to load the data to other pumps,
for example. This simplifies setting work when using multiple pumps of the same version
within a metering line as not every individual pump needs to be configured.
Fig. 73: 7-32a
Preparations for importing and exporting databases:
1. Use a blank (formatted) USB stick
NOTICE!
When using a USB memory stick, it must be formatted using F
AT 16 or
FAT 32 as otherwise it will not be detected by the pump. The size of the
memory stick should not be too large as the data volume does not require
too much space and this could result in read errors.
2. On the USB stick, create the directory ‘ECOADD’.
3. In the ‘ECOADD’ directory
, create a subdirectory with the name ‘EXPORT’.
4. In the ‘ECOADD’ directory
, create a subdirectory with the name ‘IMPORT’.
Control / software
115 Rev. 2-05.2018

Ecolab EcoAdd Specifications

General

Brand	Ecolab
Model	EcoAdd
Category	Water Pump
Language	English