Ecolab EcoAdd User Manual

7.9.13 Container size
The fill volume of the container is given under container size.
If a value is set here for pumps without Bluetooth PCB, a "Canister" (
Fig. 67, pos. B) is
displayed on the operating screen instead of the empty signal symbol (Fig. 67, pos. A). A
calculated fill level is displayed here symbolically based on the last container change.
Fig. 67: Configuration: Container size
Factory setting: No setting
[Container size] - setting:
1.
[Main menu] :
Ä Chapter 7.6 ‘Main menu’ on page 66
2.
[Configuration menu] :
Ä Chapter 7.9 ‘Overview - Configuration’ on page 83
3. Use the scrollbar to scroll to the [Container size] menu option.
4. [Container size] - select.
ð
Screen change for setting: [Container size]
5. Enter the quantity in litres (before the decimal point) using the scrollbar
.
6. Select the quantity in millilitres after the decimal point.
7. Enter the millimetres with the scrollbar
.
8.
Press the button.
ð
The setting is saved, and the screen switches back to the configuration overview
.
9.
Pressing the button returns to the [Main menu].
10.
Pressing the button returns to the [Operating display].
ð
The canister symbol (
Fig. 67, pos. B) is displayed as a new fill level symbol.
Control / software
108Rev. 2-05.2018

Ecolab EcoAdd Specifications

General

Brand	Ecolab
Model	EcoAdd
Category	Water Pump
Language	English