FlexRadio Systems FLEX-6000 Signature Series User Manual

FLEX-6000 Signature Series - SmartSDR for Windows Software User’s Guide
Page 97
Copyright 2018 FlexRadio Systems. All Rights Reserved.
reception. Slice A has ANT1 selected as the TX antenna and slice B has ANT2 selected as the TX
antenna. Clicking on the TX indicator for the slice changes the TX indicator to red and activates the
respective slice as the transmitter with its TX antenna.
25.7 USING TWO TRANSCEIVE ANTENNAS ON THE FLEX-6600/M AND FLEX-
6700
In the image above, slice A is set to receive and transmit on ANT1. Slice B is set to receive and transmit
on ANT2. The slice B is selected as the active transmit frequency of 7.033 MHz on ANT2 as indicated
by the red TX button. To move the transmit frequency to 14.225 MHz on ANT1, simply click the TX
button on slice A.
25.8 USING A DEDICATED RECEIVE ANTENNA
The image above shows slice A using a dedicated receive antenna on RX A while transmitting on
ANT1. The FLEX-6600/M and FLEX-6700/6700R models can use separate receive antennas on RX A
and RX B. The FLEX-6400/M and FLEX-6500 have only the RX A option. All radio models can receive
on the XVTR port. The XVTR port is not recommended as a receive antenna port if an external preamp

FlexRadio Systems FLEX-6000 Signature Series Specifications

General

Brand	FlexRadio Systems
Model	FLEX-6000 Signature Series
Category	Transceiver
Language	English