FLEX-6000 Signature Series - SmartSDR for Windows Software User’s Guide
Page 34
Copyright 2018 FlexRadio Systems. All Rights Reserved.
10.7 PREDEFINED RECEIVE FILTERS
Slice Receivers provide a set of predefined receive filters for each reception mode:
Clicking on the mode button in the Slice Receiver opens a drop-down menu in which you can select
the reception mode or choose one of the predefined reception filters.
10.8 RECORDING AND PLAYBACK OF SLICE RECEIVER AUDIO
Slice receivers may be recorded, and the recording played back over the air using the Quick
Record/Playback feature of SmartSDR. To the left of each Slice Receiver flag are both a record (red
circle) and play button (gray/green triangle).
On startup, there is no recorded audio in the playback buffer and so the play button will be disabled
(greyed out). To record audio from the Slice Receiver, press the record button (red circle) once.
While recording, the record button will animate a repeated pulse.
Recording will continue until the record button is pressed again or until two minutes have passed.
Recording will include any received audio while in receive mode and any transmit audio when the
radio switches to transmit mode. Once the recording is stopped, the record button will return to a
solid red circle and the play button (green triangle) will be active:
To playback the audio, press the play button. If the play button is pressed while the radio is in receive
mode, the playback audio will be routed to the speakers and headphones. If play is pressed while
the radio is in transmit mode, the audio recording will also play through the transmitter.
To Next Page
Loading...
Need help?
General
