FlexRadio Systems FLEX-6000 Signature Series User Manual

FLEX-6000 Signature Series - SmartSDR for Windows Software User’s Guide
Page 35
Copyright 2018 FlexRadio Systems. All Rights Reserved.
To stop playing audio, press the play button a second time or wait for the recorded audio to finish
playing.
To record or play again, press the appropriate button. Only one audio recording per Slice Receiver is
saved. The audio played during transmit can originate in any Slice Receiver regardless of whether
the Slice Receiver that recorded the audio is the Slice Receiver now transmitting. For example, you
may record audio using Slice Receiver A and then playback that audio over the air using Slice Receiver
B. To do this, make Slice Receiver B the transmitter by selecting it using the red TX selection to the
left of the letter B. Press the MOX button, PTT on the microphone, footswitch or other PTT source
and then press the play button on Slice Receiver A.

FlexRadio Systems FLEX-6000 Signature Series Specifications

General

Brand	FlexRadio Systems
Model	FLEX-6000 Signature Series
Category	Transceiver
Language	English