FlexRadio Systems FLEX-6000 Signature Series User Manual

FLEX-6000 Signature Series - SmartSDR for Windows Software User’s Guide
Page 134
Copyright 2018 FlexRadio Systems. All Rights Reserved.
Adjusting the Audio Gain Levels
For the transmit level setting, adjust the DAX TX Gain slider until the peak hold bar registers below
0 dB on the SmartSDR for Windows Audio Input Level meter to achieve the power output
reasonable and customary for the digital mode you are operating.
Shown below is an example of the Fldigi Sound Card Configuration with a Physical Sound Card

FlexRadio Systems FLEX-6000 Signature Series Specifications

General

Brand	FlexRadio Systems
Model	FLEX-6000 Signature Series
Category	Transceiver
Language	English