Fuji Xerox ApeosPort Print C5570 User Manual

133

[Device Certificate - Client]
Configure the client certificate for SSL/TLS communication.

[Verify Remote Server Certificate]
Configure whether to verify the certificate of the partner server when using this machine as an SSL client.
[IPsec Settings]
 [IPsec Settings]
Note

This item can be specified for one line only when a Wireless Network Kit (option) is installed.

[IKE Authentication Method]
Configure the IKE authentication method.

[Preshared Key]
Enter the pre-shared key.
Configure when [IKE Authentication Method] is [Authenticate by Preshared Key].

[Device Certificate]
Configure the certificate to be used by IPsec communication.
Configure when [IKE Authentication Method] is [Authenticate by Digital Signature].

[IPsec Communication]
Configure whether to turn on IPsec communication.

[IKE SA Lifetime]
Configure the validity term for IKE SA.
Note

Configure a term longer than [IPsec SA Lifetime].

[IPsec SA Lifetime]
Configure the validity term for IPsec SA.
Note

Configure a term shorter than [IKE SA Lifetime].

[DH Group]
Configure the DH group.

[PFS Settings]
Configure whether to turn on PFS.

[Destination IPv4 Address]
Set the IPv4 address or range of the other party to permit communication.

[Destination IPv6 Address]
Set the IPv6 address or range of the other party to permit communication.

[Communicate with Non-IPsec Devices]
Configure whether to communicate with devices that are not compatible with IPsec at addresses that are not the
configured address of the other party.
[IEEE 802.1X Settings]
 [IEEE 802.1X Settings]/[IEEE 802.1X Settings (Ethernet 1)]

[IEEE 802.1X]
Configure whether or not to use IEEE 802.1x authentication.

[Authentication Method]
Configure the IEEE 802.1x authentication method.
Note

[EAP-TLS] requires storage (optional) and a client certificate.

Fuji Xerox ApeosPort Print C5570 Specifications

General

Brand	Fuji Xerox
Model	ApeosPort Print C5570
Category	Printer
Language	English