142
6 Changing the Machine Settings
[User Details Setup]
[Change Password]
An authenticated user can change their own password.
Note
Displayed when [User Role] is set to [Local User] or [Account Administrator].
[Audit Log Settings]
Configure audit log settings and settings related to Syslog sending (using the Syslog protocol to send audit logs to
another computer on the network).
Audit logs record who performed what operations and when on the machine. The audit log function lets you
monitor machine operations to detect unauthorized use or attempted unauthorized use.
Note
Use CentreWare Internet Services to retrieve audit logs. For more information, refer to the CentreWare Internet Services
Help.
Refer
For items saved to the audit log, refer to the “Audit log reference guide” provided on our official website.
[Record Audit Log]
Configure whether to record an audit log.
If the audit log function is turned on, an audit log is recorded to this machine.
The log saves up to 15000 entries, and when the number exceeds 15000, the oldest entries are deleted.
[Send Audit Log to Syslog Server]
Configure whether to send audit logs to a Syslog server.
[Syslog Server Name/Address]
Enter the server name or IP address of the Syslog server.
[Syslog UDP/TCP Port Number]
Enter the UDP or TCP port number of the Syslog server.
[Syslog TLS Port Number]
Enter the TLS port number of the Syslog server.
[Syslog Transport Protocol]
Configure the trace protocol when sending to a Syslog server.
[Syslog Facility]
Enter the facility number of the audit logs to be sent to the Syslog server.
[Syslog Timeout Value]
Enter the sending timeout value during Syslog sending.
[When Send Error Occurs]
Configure operation when the maximum number of audit logs on the machine not sent to the Syslog server is
reached.
To Next Page
Loading...
Need help?
General
