Fuji Xerox ApeosPort Print C5570 User Manual

249
11.1 Specifications
11 Appendix
11.1 Specifications
Product Code

ApeosPort Print C5570: TC101514
Printing Method
LED xerography
Important

LED + Xerographic.
Warm-up Time
When an embedded plug-in function/custom service is turned on

27 seconds or less (when the main power is on at a room temperature of 23°C) (11 seconds or less in Sleep mode)
When an embedded plug-in function/custom service is not turned on

21 seconds or less (when the main power is on at a room temperature of 23°C) (11 seconds or less in Sleep mode)
Important

Embedded Plug-ins/Custom Services are enabled as factory default. You can change the settings if needed.
Continuous Print Speed
1-sided printing

A4 : Color 55 sheets/min, monochrome 55 sheets/min

A3: color 27 sheets/min, monochrome 27 sheets/min
2-sided printing

A4 : Color 55 pages/min, monochrome 55 pages/min

A3: Color 19 pages/min, monochrome 19 pages/min
Important

When Continuously Printing Original. The performance may be reduced depending on the paper type and the paper size.
The speed may be reduced due to the image quality adjustment.
First Print Time
5.0 seconds (A4 color), 3.5 seconds (A4 monochrome)
Important

The time is measured by using the built-in paper tray. It may vary depending on the output environment.
Resolution

PCL Driver:
Standard: 1200×2400 dpi, High quality: 1200×2400 dpi, High resolution: 1200×1200 dpi

Adobe PostScript 3™ Driver:
Standard: 600×600 dpi, High quality: 1200×2400 dpi, High resolution: 1200×1200 dpi

Fuji Xerox ApeosPort Print C5570 Specifications

General

Brand	Fuji Xerox
Model	ApeosPort Print C5570
Category	Printer
Language	English