200
8 Maintenance
8.3 Adjusting the booklet fold position
Configure booklet fold locations individually for smaller than B4 and B4 or larger.
1. Load the paper in the tray to adjust the fold position.
2. Tap the display area of authentication information at the top left of the Home screen, and then log in as a
machine administrator.
3. Tap [Device].
4. Tap [Maintenance]>[Adjust Booklet Fold Position].
5. Tap [Paper Supply] to select the loaded paper.
6. Tap [Sample Printout].
7. Check the printed sample and measure the amount of deviation.
8. Tap [Next].
9. Select the output paper fold and staple position in [Adjust Booklet Fold Position].
10. Tap [Next].
11. Enter the value measured in Step 7 and tap [Sample Printout].
12. Check the adjustment result in the printed sample. If necessary, perform the adjustment once again.
To Next Page
Loading...
Need help?
General
